//Geophysical Institute (GFI), University of Bergen (UiB)
//The file contains measurements made by Recording Current Mooring (RCM) or Seabird instrument and
//consists of six sections
//
//1. METADATA:   information about RCM
//
//2. CONVERSION COEFFICIENTS:   variables’ conversion coefficients from the closest calibration sheet (if
//available) or from .hdr file (if calibration sheet is not available). Default coefficients were used
//at some RCMs.
//conversion equation:  A + B*val +  C*val*val + D*val*val*val   ,where ‘val’-is a variable value
//in engineering unit, A,B,C,D - conversion coefficients
//
//3. ROWDATA:   variables in engineering units from RCM channels
//Channels abbriviation: Refence number (Ref), Temperature (Temp), Conductivity (Cond), Pressure (Press),
//Current direction (Dir), Current speed (Speed), Turbidity (Turb), Oxygen (Oxyg)
//Last column (QFL) contains QC flags changed to SeaDataNet standard
//Note: channel 4 can contain either pressure or temperature values
//
//4. CONVERTED DATA:   variables converted from engineering into physical units
//variables units : Temperature (deg. C),  Salinity(PSU),  Pressure/Temperature (m/deg.C),
//Current direction (deg),  Current speed(cm/s),  Turbidity (NTU), Oxygen (%)
//variables flags name convection: Temperature (TFL), Salinity (SFL), Current direction or speed
//(CFL), Pressure (PFL), Turbidity (UFL), Oxygen (OFL)
//Current direction was corrected by adding magnetic correction
//
//5. CORRECTION COEFFICIENTS: coefficients for time series correction  
//defined only for RCM with salinity time series against available CTD profiles 
//in current version coefficient defined only for temperature and salinity below 100 m 
//
//6. CORRECTED DATA: converted data with applied correction coefficients  
//if were defined (coefficient<>0) and apply parameters set to apply (=1)) 
//corrected data also available in separate file 
//
//IMPORTANT:   current version of time series passed three stages of quality control
//The first stage  – seting of QC flags on ROWDATA (all variables are affected)
//The second stage – seting of QC flags on converted individual variables
//The third stage - temp and salt time series correction (where was possible) against
//CTD data
//
//
//The file was created  by the ‘CURRENTS’ application developed by Alexander Korablev,
//Geophysical Institute, University of Bergen
//file creation date:21.02.2017 14:24:09

###METADATA
GFI_MOORINGS.FDB               //database name
SVI201509_S2200                //mooring ID
1953                           //RCM unique number in database
1                              //RCM quality control flag
RCM8                           //RCM type
9907                           //RCM number
64.03026                       //RCM position latitude (deg)
1.51011                        //RCM position longitude (deg)
2111                           //RCM depth (m)
22.09.2015 07:00:00            //RCM start time
22.09.2015 07:00:00            //RCM stop time
60                             //RCM time interval (min)
0.00                           //time series duration (days)
-9                             //number of records (unflagged ROWDATA)
-9                             //number of records (unflagged Converted Data)
RT00DS000                      //RCM Channels: 1.Ref 2.Temp 3.Cond 4.Dir 5.Speed 6.Press/Temp 7.tUrb 8.Oxyg 9.Reserved   without measurements: 0
2                              //temperature channel for conductivity conversion
2224                           //Bottom depth (m) missing value: -9
                               //Region
SVINOY                         //Place
Kjell Arild Orvik              //Principal Investigator
NACO                           //Project name
20031030_9907.pdf              //Calibration sheet with conversion coefficients
9907.lst                       //source file name from GFI archive
-1.5                           //magnetic correction from www.ngdc.noaa.gov/geomag-web/


###COEFFICIENTS 
Temperature
A=0.00000
B=0.00000
C=0.0000E+00
D=0.0000E+00
Current direction
A=0.00000
B=0.00000
C=0.0000E+00
D=0.0000E+00
Current speed
A=0.00000
B=0.00000
C=0.0000E+00
D=0.0000E+00


###ROWDATA
 Date        Time	Ref	Temp	Dir	Speed	QFL


###CONVERTED DATA
 Date        Time	Temp	Dir	Speed	TFL	CFL	CFL	


###CORRECTION COEFFICIENTS 
0     0.000     Apply/coefficient for Current angle
0     0.000     Apply/coefficient for Current speed
0     0.000     Apply/coefficient for Temperature
0     0.000     Apply/coefficient for Salinity
0     0.000     Apply/coefficient for Pressure/Temperature
0     0.000     Apply/coefficient for Turbidity
0     0.000     Apply/coefficient for Oxygen


###CORRECTED DATA
 Date        Time	Temp	Dir	Speed	TFL	CFL	CFL